NANUK 988 4-UP Rifle Case (41.7 x 13.6 x 12.5")

Built to organize, protect, carry, and survive tough conditions, the 988 4-Up Rifle waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and six (6) PowerClaw latches.

With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

The NANUK 988 4-Up Rifle Case is specifically designed to meet the strict demands of military professionals, law enforcement officers, competitive shooters, instructors, and firearms enthusiasts and to prioritize protection, fit, versatility, and security.

All NANUK indestructible cases are IP67 rated and are built to protect mission-critical gear from repeated blows, drops, and shocks.

The NANUK 988 4-Up Rifle Case is fitted with high-grade custom-cut closed-cell foam engineered to fit four (4) rifles up to 39.75’’ in length with different optics installed including scopes, red dots, and everything in between.

The center cavities allow storage of up to twelve (12) magazines and two (2) NANUK reusable desiccant containers that actively remove moisture inside of the case.

For extra security and peace of mind, the case can be locked using the two integrated, reinforced eyelets and two NANUK TSA padlocks.

TSA-accepted key lock PowerClaw latches can also be added as an option to keep your equipment securely locked during transit but accessible for inspection by the TSA when required.

This indestructible MIL-Spec case is equipped with a lid stay feature to keep the case safely open when in use.

The NANUK 988 4-Up Rifle protective case is equipped with two (2) large polyurethane wheels and three (3) soft grip and ergonomic handles to make it easy to transport. It also features stainless steel hardware and spring-loaded handles to avoid harm when traveling or during shipping.

This transport case is also equipped with two (2) automatic pressure release valves for accrued performance.

This MIL-Spec injection molded case is backed by a lifetime warranty.

Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black

Interior Dimensions:  41.75 x 13.63 x 12.50" (106 x 34.6 x 31.8 cm)

LID DEPTH: 2.75" (7 cm)  / BOTTOM DEPTH:  9.75" (24.8 cm)

Exterior Dimensions:   44.88 x 16.25 x 13.56" (114 x 41.3 x 34.4 cm)

Weight:  24 lbs. (10.92 kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Max Buoyancy:  284 lbs

Padlock Holes Diameter: .340"

Industry Standards & Certifications:   IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.