The NANUK 965 is big and strong but surprisingly easy to
maneuver. At 29” long and nearly 14” deep, it’s built to organize,
protect, carry a whole lot of your essentials.
This waterproof hard case is impenetrable and indestructible with a
lightweight, tough NK-7 resin shell and five (5) PowerClaw latches. With
NANUK’s exclusive locking and latching system, your case stays shut and
secured until you are ready to open it.
The NANUK 965 hard case will take extreme abuse with the maximum level of protection for all of your professional equipment.
This protective case adds the convenience of a retractable handle and
wheels that glide to make it easier to travel with your photo gear,
video gear, audio gear, medical or industrial equipment, outdoor gear
and much more! Three soft-grip handles make this wheeled case one of the
most convenient and comfortable on the market.
The NANUK 965's polyurethane wheels handle rough terrain with
ease while the one-handed retractable handle offers unparalleled
The NANUK 965 protective case comes with three (3) soft grip and
ergonomic handles with stainless steel hardware and spring-loaded
handles to make hauling large loads easy. This transport case is also
equipped with an automatic pressure release.
This MIL-Spec injection molded case is backed by a lifetime warranty.
Inside, products can be secured with cubed foam, custom foam, padded
dividers or the case can be purchased empty.
Our goal is to provide each customer the perfect case solution. Contact us
or give us a call at 619-660-2300 to discuss your case needs.
- Powerclaw Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- 2-Stage Retractable Handle
- Polyurethane Wheels
- Side Mounted Spring Loaded Handles
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel Hardware
- Conditional Lifetime Guarantee* (see Warranty below)
- Made in Canada
Materials: Lightweight NK-7™ resin - Polypropylene
Available Colors: Black
Interior Dimensions: 29.00 x 18.00 x 14.00" (73.7 x 45.7 x 35.6 cm)
LID DEPTH: 2.1" (5.3 cm) / BOTTOM DEPTH: 11.9" (30.2 cm)
Exterior Dimensions: 32.5 x 21.00 x 15.8" (82.6 x 53.6 x 40.6 cm)
Weight: 25.05 lbs. (11.36 kg.) Empty
Depth Rating: 3 feet for 30 minutes (IP67)
Temperature Range: -20° F (-29 ° C) to 140° F (60 ° C)
Buoyancy: 270 lbs. (122 kg)
Padlock Holes Diameter: 0.340"
Handle Height from Ground: 36" / 41"
Industry Standards & Certifications: IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1
Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration),
ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)
LIFETIME LIMITED WARRANTY AND DISCLAIMER
Inc. (“Plasticase”) warrants that the NANUK case accompanying this
document (the “Case”) will be free from defects in material and
workmanship for the life of the Case, subject to the terms and
conditions of this Limited Warranty and Disclaimer (the “Warranty”).
of Warranty The Warranty herein applies only to the original customer
and is conditional upon the customer giving prompt notice to
Plasticase of any discovered defects. Plasticase shall not be
responsible for any other defects or damage, including, but not limited
to, any defects or damage caused by or resulting from: (a) alterations
to the Case by anyone other than Plasticase; (b) accident; (c) damage
due to an intentional or negligent act of a third party; (d) abuse or
negligence; (e) wear and tear.; (f) mishandling; (g) failure to use
the Case in a safe and reasonable manner, or (h) force majeure. If the
Case, in the judgment of Plasticase, shows evidence of having been
altered, modified or repaired without the authorization of Plasticase,
the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS
EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED
OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Plasticase’s cumulative liability for damages of any kind whatsoever
arising out of the use or possession of the Case, regardless of the
form of action, whether in contract or tort, including negligence or
strict liability, shall be limited to the purchase price of the Case.
IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER
PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE
CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT
PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH
DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.