NANUK 938 6UP Gun Case Waterproof Wheeled Case (21.5 x 12.5 x 11.6")

Built to organize, protect, carry and survive tough conditions, the NANUK 938 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

The NANUK 938 6 UP Pistol Case provides secure storage for up to six (6) full-frame handguns with trigger locks and ten (10) magazines.

It meets storage standards and regulations for firearms. This hard case fits all pistols with barrel lengths up to 5", has extra depth to accept 1911 style or any customized handguns and accommodates the weapons with their trigger locks in place.

Designed for law enforcement agencies, military, shooting instructors, shooting clubs and schools, industry representatives, consultants, gun dealers and collectors/enthusiasts, this case features semi-rigid and highly-resistant closed cell Synergy® PEF foam for long term performance.

The 938 6 Up Pistol case adds the convenience of wheels to make traveling with your firearms much easier.

Three soft-grip handles make this wheeled case one of the most convenient on the market. The 938's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.

The NANUK 938 protective case features stainless steel hardware and spring- loaded handles to avoid harm when traveling or during shipping.

This transport case is also equipped with an automatic pressure release valve and two stainless steel reinforced eyelets that can be used to secure padlocks. 

This MIL-Spec injection molded case is backed by a lifetime warranty. Also available with our NANUK Lid organizer.

Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black, Orange, Yellow

Interior Dimensions:  21.5 x 12.5 x 11.6" (54.6 x 31.8 x 29.4 cm)

LID DEPTH:  2.1" (5.3cm)  / BOTTOM DEPTH:  9.5" (24.1 cm)

Exterior Dimensions:  23.8 x 15.5 x 13.2" (60.5 x 39.4 x 33.6 cm)

Weight:  14.55 lbs. (6.35 kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Buoyancy:   115 lbs. (52 kg)

Padlock Holes Diameter: 0.340"

Handle Height from Ground: 31.5" / 37"

Industry Standards & Certifications:   IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL "PURPOSE OF ANY LIMITED REMEDY.