SKB’s 30 inch 3RR Series Removable Shock Rack Transport cases are
now available in 3 sizes, 3U, 4U, and 5U. These Shock Racks are
lightweight, shockproof, watertight, dustproof, heat and chemical
resistant, perfect for protecting and transporting your sensitive
Molded of LMDP Linear Medium Density
Polyethylene plastic that meets or exceed MIL-STD 810G standards and
includes 8 elastomeric shock absorbers which allows a standard payload
range of 40 to 150 pounds. Optional extended payload range of 160 to
300 pounds can be accommodated as a special order option. These 3RR
Series Removable Racks are 30” deep from rail to rail with a standard
19” rack width per ANSI/EIA-310-C specification and feature square-hole
rack rails to accommodate either #10-32 US standard, or 6mm
International standard cage nuts which are supplied with the cases.
The rugged roto-molded shell ensures industry leading strength and
impact resistance. The standard COTS (commercial off the shelf) case
comes with a 2” deep front lid and a 5” deep rear lid to accommodate
rack gear that is longer than 30”, and edge casters to allow
convenient case transport. Molded-in stacking ribs and lugs are
designed to stack with competitive manufacturers cases. Black powder
coated stainless steel hardware are recessed for protection is
standard as well as 8 comfort grip spring loaded lift handles which
allow for easy movement. An automatic pressure relief valve is
another standard feature along with gasket sealed lids that include
convenient lid hangers to store your lids when your equipment is in
operation. Coupling straps are included for securing the racks
together when stacked.
The interior rack chassis slides
out and is fully removable from the inner rack frame. This feature
allows the user to remove the chassis from the case for integration
and maintenance of equipment to allow full access and convenience on a
workbench. The inner chassis is held in place with our patent
pending “positive lock” securing system that consists of two (2) die
cast latches on the front end of the frame and chassis. The positive
lock securing system ensures that all shock and vibration is
transmitted directly to the elastomeric isolators to allow efficient
reduction of harmful conditions..
Standard color is Black, also available in Desert Tan or OD Green as a special order.
Our goal is to provide each customer the perfect case solution. Contact us
or give us a call at 619-660-2300 to discuss your case needs.
- Completely removable frame for access to bench integration
- Meets or Exceeds MIL-STD 810G
- Standard payload range 40 to 150 lbs
- .optional extended payload range 160 to 300 lbs.
- Standard 19” Rack width per ANSI/EIA-310-C
- Standard Rack depth 30” rail to rail,
- Square hold rack rails to accommodate either #10-32 US standard, or 6mm international standard cage nuts
- 2” front lid, and 5” rear lid with edge casters standard, other options available
- SKB’s Rugged roto-molded shell ensures industry leading strength and impact resistance
- Molded in stacking ribs and lugs are designed to stack with competitive manufacturers cases
- Black powder coated stainless steel hardware (standard) which are recessed for protection
- 8 comfort grip spring loaded lift handles
- Automatic pressure relief valve (standard)
- Lid hangars (standard)
- Case coupling straps (standard)
Materials: LMDP Linear Medium Density Polyethylene plastic that meets or exceed
MIL-STD 810G standards and includes 8 elastomeric shock absorbers which
allows a standard payload range of 40 to 150 pounds.
Available Colors: Black
*Available in Desert Tan or OD Green as Special Order
Interior Dimensions: 30.00 x 19.00 x 5.25" (76.20 x 48.26 x 13.34 cm)
INT VOLUME: 1.73 cu ft. (0.05 cu m)
Exterior Dimensions: 45.03 x 23.80 x 11.82" (114.38 x 60.45 x 30.02 cm)
EXT VOLUME: 7.33 cu ft. (0.21 cu m)
Space Units Total: 3
Rackable Depth: 30.00" (76.20 cm)
Weight: 63.20 lbs. (28.67 kg)
Front doors are 2" deep and Rear Doors are 5" deep.
SKB's Lifetime Warranty:
hardshell cases are fully warranted against defects in materials and
craftsmanship for the life of the case to the original owner. That
means, if your case breaks, SKB will supply replacement parts, repair
the case, or replace your case for as long as you own it. Proof of
Purchase is required for all warranty claims. Electronic components in
SKB brand hardshell pedalboard systems are warranted for five years
from date of purchase. Soft cases and gig bags are warranted for one
year from date of purchase. SKB is not responsible for the shipping cost to their facility.
However, SKB will cover all of the costs of repairs and/or
replacements, as well as the return shipping. SKB hardshell cases are
warranted for life to the original owner only. Cases used rental
purposes, used by institutions or schools, modified or used cases are
not covered by this warranty.The warranty does not cover contents,
so we strongly urge customers to test the case prior to use.