The NANUK 938 can store a whole lot of your essentials.
At 21.5” long and nearly 12” deep, it offers the maximum level of
protection for all of your personal and professional equipment. The
NANUK 938 has the convenience of polyurethane wheels to make it easy to
travel with your photo gear, video gear, audio gear, industrial
equipment, medical equipment, outdoor gear and much more!
Built to organize, protect, carry and survive tough conditions.
The 938 waterproof hard case is impenetrable and indestructible with a
lightweight, tough NK-7 resin shell and it’s dual PowerClaw latches.
With NANUK’s exclusive locking and latching system, the NANUK 938 case
stays shut and secured until you are ready to open it.
Three soft-grip handles make this wheeled case one of the most convenient on the market.
The 938's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
No matter where you go, you're guaranteed a smooth and easy ride. You
can trust the world’s best protective case to get your gear safely from
point A to point B.
The NANUK 938 protective case comes with one retractable and three soft grip and ergonomic handles with stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping.
This transport case is also equipped with an automatic pressure
release valve and an integrated bezel system to accommodate custom
panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty.
Inside, products can be secured with cubed foam, custom foam, padded
dividers or the case can be purchased empty.
Our goal is to provide each customer the perfect case solution. Contact us
or give us a call at 619-660-2300 to discuss your case needs.
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- 2-Stage Retractable Handle
- Polyurethane Wheels
- Side mounted spring loaded handles
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removeable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel hardware
- Conditional Lifetime Guarantee* (see Warranty below)
- Made in Canada
Materials: Lightweight NK-7™ resin - Polypropylene
Available Colors: Black, Orange, Yellow
Interior Dimensions: 21.5 x 12.5 x 11.6" (54.6 x 31.8 x 29.4 cm)
LID DEPTH: 2.1" (5.3cm) / BOTTOM DEPTH: 9.5" (24.1 cm)
Exterior Dimensions: 23.8 x 15.5 x 13.2" (60.5 x 39.4 x 33.6 cm)
Weight: 14.55 lbs. (6.35 kg.) Empty
Depth Rating: 3 feet for 30 minutes (IP67)
Temperature Range: -20° F (-29 ° C) to 140° F (60 ° C)
Buoyancy: 115 lbs. (52 kg)
Padlock Holes Diameter: 0.340"
Handle Height from Ground: 31.5" / 37"
Industry Standards & Certifications: IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1
Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration),
ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)
LIFETIME LIMITED WARRANTY AND DISCLAIMER
Inc. (“Plasticase”) warrants that the NANUK case accompanying this
document (the “Case”) will be free from defects in material and
workmanship for the life of the Case, subject to the terms and
conditions of this Limited Warranty and Disclaimer (the “Warranty”).
of Warranty The Warranty herein applies only to the original customer
and is conditional upon the customer giving prompt notice to
Plasticase of any discovered defects. Plasticase shall not be
responsible for any other defects or damage, including, but not limited
to, any defects or damage caused by or resulting from: (a) alterations
to the Case by anyone other than Plasticase; (b) accident; (c) damage
due to an intentional or negligent act of a third party; (d) abuse or
negligence; (e) wear and tear.; (f) mishandling; (g) failure to use
the Case in a safe and reasonable manner, or (h) force majeure. If the
Case, in the judgment of Plasticase, shows evidence of having been
altered, modified or repaired without the authorization of Plasticase,
the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS
EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED
OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Plasticase’s cumulative liability for damages of any kind whatsoever
arising out of the use or possession of the Case, regardless of the
form of action, whether in contract or tort, including negligence or
strict liability, shall be limited to the purchase price of the Case.
IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER
PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE
CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT
PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH
DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL "PURPOSE OF ANY LIMITED REMEDY.