The NANUK 923 Laptop case is designed to fit most 15" laptops.
The molded interior has been engineered to protect your laptop from
the dangers of travel and use in potentially harmful environments while
providing generous space for accessories and other necessities in both
the lid and under the laptop.
The included removable laptop sleeve offers an extra layer of protection and usability.
Don't need the heavy-duty protection of the 923 case when you arrive
at your destination? Simply take out the sleeve, hook on the Aircell™
shoulder strap and you are ready to go! The 923 Laptop is also the
perfect solution for laptop check-in requirements. TSA compliant keyed
latches keep your device safe but accessible to TSA agents if an
inspection is required.
Rugged, waterproof and dustproof, the NANUK 923 laptop case
adapts to every environment for professionals who need extreme-duty
protection whether it’s a board room or a job site.
Built to organize, protect, carry and survive tough conditions, the
923 laptop waterproof hard case is impenetrable and indestructible with a
lightweight, tough NK-7 resin shell and it’s PowerClaw superior
latching system. With NANUK’s exclusive locking and latching system,
your case stays shut and secured until you are ready to open it.
The NANUK 923 laptop protective case comes with a soft grip and
ergonomic handle to make it easy to transport. It also features
stainless steel hardware and a spring-loaded handle to keep it out of
harm’s way when traveling or during shipping.
This case is also equipped with an automatic pressure release valve.
For extra security, two latches feature an integrated TSA accepted key
lock to keep your equipment securely locked during transit but
accessible for inspection by the TSA when required.
Our goal is to provide each customer the perfect case solution. Contact us
or give us a call at 619-660-2300 to discuss your case needs.
- Designed to fir most 15" laptops
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Molded-in Bezel System
- Soft Grip Handle
- Automatic Pressure Release Valve
- Integrated Stay Lid
- 100% Stainless Steel hardware
- Lifetime Guarantee* (see Warranty below)
- Made in Canada
Materials: Lightweight NK-7™ resin - Polypropylene
Available Colors: Black, Orange, Yellow, Silver, Graphite
Interior Dimensions: 16.6 x 11.3 x 5.4" (42.2 x 28.7 x 13.7 cm)
LID DEPTH: 1.8" (4.6 cm) / BOTTOM DEPTH: 3.6" (9.1 cm)
Exterior Dimensions: 18.6 x 14.4 x 6.3" (47.2 x 36.6 x 16.0 cm)
Weight: 5.9 lbs. (2.7 kg.) Empty
Depth Rating: 3 feet for 30 minutes (IP67)
Temperature Range: -20° F (-29 ° C) to 140° F (60 ° C)
Buoyancy: 40 lbs. (18.1 kg)
Padlock Holes Diameter: 0.340"
Industry Standards & Certifications: IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1
Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration),
ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)
LIFETIME LIMITED WARRANTY AND DISCLAIMER
Inc. (“Plasticase”) warrants that the NANUK case accompanying this
document (the “Case”) will be free from defects in material and
workmanship for the life of the Case, subject to the terms and
conditions of this Limited Warranty and Disclaimer (the “Warranty”).
of Warranty The Warranty herein applies only to the original customer
and is conditional upon the customer giving prompt notice to
Plasticase of any discovered defects. Plasticase shall not be
responsible for any other defects or damage, including, but not limited
to, any defects or damage caused by or resulting from: (a) alterations
to the Case by anyone other than Plasticase; (b) accident; (c) damage
due to an intentional or negligent act of a third party; (d) abuse or
negligence; (e) wear and tear.; (f) mishandling; (g) failure to use
the Case in a safe and reasonable manner, or (h) force majeure. If the
Case, in the judgment of Plasticase, shows evidence of having been
altered, modified or repaired without the authorization of Plasticase,
the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS
EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED
OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Plasticase’s cumulative liability for damages of any kind whatsoever
arising out of the use or possession of the Case, regardless of the
form of action, whether in contract or tort, including negligence or
strict liability, shall be limited to the purchase price of the Case.
IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER
PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE
CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT
PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH
DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.