NANUK 988 Waterproof Long Case (41.7 x 13.6 x 12.5")

NANUK-988
$429.95
NANUK 988 Waterproof Long Case (41.7 x 13.6 x 12.5")
Processing...

Product Details


Long, deep, rugged, and tough, NANUK 988 will protect and mobilize loads of gear with room to spare. It's built to go fast with stainless steel ball-bearing wheels and three spring-loaded handles that make it the perfect premium waterproof protective case to go anywhere.

Waterproof and dustproof, it's built so it can be thrown in the back of a pick-up, stacked on a pallet, taken to the set or the range with confidence. Designed with a long and deep interior of 41.75" x 13.63’’x 12.5" (1060mm x 346mm x 318mm), it fits lighting equipment, tripods, camera equipment, telescopes, bunker gear, rifles, chainsaws, industrial equipment, and more.

The 988 is part of our Configurable Series. The base model equipped with three (3) ultra-strong handles and two (2) strong polyurethane large wheels with stainless steel ball bearings is for any terrain. If your needs change, the wheel assemblies on the 988 are removable and can be replaced by our custom corner caps. The 988T and 988M are lighter with no wheels to facilitate team carry deployment and to meet agency restrictions against one-person carry. The 988T and 988M also offer a lower profile for efficient warehousing and tight spaces. Both are available as custom orders.

Like all NANUK waterproof protective cases, the 988 is made of NK7 resin and equipped with six (6) of our legendary PowerClaw latches. The 988 is indestructible and will never open accidentally. Molded with deeper ribs and taller feet, it's highly stackable.

The 988 comes with our lifetime warranty, your assurance that we build cases to protect your most valuable gear for life. Additionally, a polycarbonate ID Window is available as an option. It attaches quickly and easily to the front of the 988. Other options include TSA Approved Latches as a retrofit kit, TSA Approved Padlocks, Panel Installation Kit, Multi-Layer Solid Foam, and Padded Dividers.

Our goal is to provide each customer the perfect case solution. Contact us or give us a call at 619-660-2300 to discuss your case needs.

FEATURES

  • TSA Powerclaw Latching System
  • Waterproof IP67 Rated
  • Indestructible NK-7 Resin
  • Reinforced Metal Padlock Holes
  • Stackable
  • Polyurethane Wheels
  • Spring Loaded Top Handle
  • Soft Grip Handle Stay
  • Automatic Pressure Release Valve
  • 100% Stainless Steel hardware
  • Conditional Lifetime Guarantee* (see Warranty below)
  • Made in Canada
Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black

Interior Dimensions:  41.75 x 13.63 x 12.50" (106 x 34.6 x 31.8 cm)
LID DEPTH: 2.75" (7 cm)  / BOTTOM DEPTH:  9.75" (24.8 cm)

Exterior Dimensions:   44.88 x 16.25 x 13.56" (114 x 41.3 x 34.4 cm)

Weight:  24 lbs. (10.92 kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Max Buoyancy:  284 lbs

Padlock Holes Diameter: .340"

Industry Standards & Certifications:   IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.