NANUK 968 Waterproof Wheeled Case (21.5 x 21.5 x 11.8")

NANUK-968
$324.95
NANUK 968 Waterproof Wheeled Case (21.5 x 21.5 x 11.8")
Processing...

Product Details


With more than 275 cubic inches of capacity, the NANUK 968 waterproof case with a retractable handle and easy-glide wheels can store and haul a whole lot of gear.

Built to organize, protect, carry and survive tough conditions, the 968 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s six (6) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays clamped shut and secured until you are ready to open it.

The NANUK 968 hard case offers the maximum level of protection for all of your personal and professional equipment.

This protective case adds the convenience of wheels to make it easier to travel with your photo gear, video gear, audio gear, bigger drones, medical or industrial equipment, outdoor gear and much more! 

Retractable handle and a set of wheels make this case one of the most convenient on the market.

The NANUK 968's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability and comfort.

The three (3) soft grip and ergonomic handles make the NANUK 968 easy to transport.

They feature stainless steel hardware and spring loaded handles to keep them out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release.

This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.

Our goal is to provide each customer the perfect case solution. Contact us or give us a call at 619-660-2300 to discuss your case needs.

FEATURES

  • Powerclaw Latching System
  • Waterproof IP67 Rated
  • Impact Resistant NK-7 Resin
  • Reinforced Metal Padlock Holes
  • Stackable
  • 2-Stage Retractable Handle
  • Polyurethane Wheels
  • Side Mounted Spring Loaded Handles
  • Automatic Pressure Release Valve
  • Integrated Lid Stay
  • Removable Lid
  • Top and Bottom Panel Mount
  • 100% Stainless Steel Hardware
  • Conditional Lifetime Guarantee* (see Warranty below)
  • Made in Canada
Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black.

Interior Dimensions:  21.5 x 21.5 x 11.8" (54.6 x 54.6 x 30.0 cm)
LID DEPTH: 2.3" (5.8 cm)  / BOTTOM DEPTH:  8.0" (20.3 cm)

Exterior Dimensions:   25.0 x 24.7 x 13.6" (61.0 x 62.7 x 34.5 cm)

Weight:  21.5 lbs. (9.76 kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Buoyancy:   200 lbs. (91 kg)

Padlock Holes Diameter: 0.340"

Handle Height from Ground: 22.5" / 36.25"

Industry Standards & Certifications:   IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.