NANUK 965 Waterproof Wheeled Case (29.00 x 18.00 x 14.00")

The NANUK 965 is big and strong but surprisingly easy to maneuver. At 29” long and nearly 14” deep, it’s built to organize, protect, carry a whole lot of your essentials.

This waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and five (5) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

The NANUK 965 hard case will take extreme abuse with the maximum level of protection for all of your professional equipment.

This protective case adds the convenience of a retractable handle and wheels that glide to make it easier to travel with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and comfortable on the market.

The NANUK 965's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability.

The NANUK 965 protective case comes with three (3) soft grip and ergonomic handles with stainless steel hardware and spring-loaded handles to make hauling large loads easy. This transport case is also equipped with an automatic pressure release.

This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.

Our goal is to provide each customer the perfect case solution. Contact us or give us a call at 619-660-2300 to discuss your case needs.

Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black

Interior Dimensions:  29.00 x 18.00 x 14.00" (73.7 x 45.7 x 35.6 cm)

LID DEPTH: 2.1" (5.3 cm)  / BOTTOM DEPTH:  11.9" (30.2 cm)

Exterior Dimensions:   32.5 x 21.00 x 15.8" (82.6 x 53.6 x 40.6 cm)

Weight:  25.05 lbs. (11.36 kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Buoyancy:   270 lbs. (122 kg)

Padlock Holes Diameter: 0.340"

Handle Height from Ground: 36" / 41"

Industry Standards & Certifications:   IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.