NANUK 938 Waterproof Wheeled Case (21.5 x 12.5 x 11.6")

NANUK-938
$259.95
NANUK 938 Waterproof Wheeled Case (21.5 x 12.5 x 11.6")
Processing...

Product Details

The NANUK 938 can store a whole lot of your essentials.

At 21.5” long and nearly 12” deep, it offers the maximum level of protection for all of your personal and professional equipment. The NANUK 938 has the convenience of polyurethane wheels to make it easy to travel with your photo gear, video gear, audio gear, industrial equipment, medical equipment, outdoor gear and much more!

Built to organize, protect, carry and survive tough conditions.

The 938 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s dual PowerClaw latches. With NANUK’s exclusive locking and latching system, the NANUK 938 case stays shut and secured until you are ready to open it.

Three soft-grip handles make this wheeled case one of the most convenient on the market.

The 938's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.

No matter where you go, you're guaranteed a smooth and easy ride. You can trust the world’s best protective case to get your gear safely from point A to point B.

The NANUK 938 protective case comes with one retractable and three soft grip and ergonomic handles with stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping.

This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.

This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.

Our goal is to provide each customer the perfect case solution. Contact us or give us a call at 619-660-2300 to discuss your case needs.

FEATURES

  • Powerclaw Superior Latching System
  • Waterproof IP67 Rated
  • Impact Resistant NK-7 Resin
  • Reinforced Metal Padlock Holes
  • Stackable
  • 2-Stage Retractable Handle
  • Polyurethane Wheels
  • Side mounted spring loaded handles
  • Automatic Pressure Release Valve
  • Integrated Lid Stay
  • Removeable Lid
  • Top and Bottom Panel Mount
  • 100% Stainless Steel hardware
  • Conditional Lifetime Guarantee* (see Warranty below)
  • Made in Canada
Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black, Orange, Yellow

Interior Dimensions:  21.5 x 12.5 x 11.6" (54.6 x 31.8 x 29.4 cm)
LID DEPTH:  2.1" (5.3cm)  / BOTTOM DEPTH:  9.5" (24.1 cm)

Exterior Dimensions:  23.8 x 15.5 x 13.2" (60.5 x 39.4 x 33.6 cm)

Weight:  14.55 lbs. (6.35 kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Buoyancy:   115 lbs. (52 kg)

Padlock Holes Diameter: 0.340"

Handle Height from Ground: 31.5" / 37"

Industry Standards & Certifications:   IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL "PURPOSE OF ANY LIMITED REMEDY.