NANUK 910 2UP Classic Gun Case (13.2 x 9.2 x 4.1")

NANUK-910_2UP_Classic_Gun_Case
$102.95
NANUK 910 2UP Classic Gun Case (13.2 x 9.2 x 4.1")
Processing...

Product Details


Built to organize, protect, carry and survive tough conditions, the 910 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

This case features durable, closed-cell, pre-cut PEF foam construction in the base and soft cushioned foam in the lid for long term performance and protection. The case will also accommodate pistols with trigger locks as well as models with a beavertail design. The case can be locked using the two integrated reinforced eyelets allowing you to store, secure and transport your pistol with confidence.

Lightweight, rugged and compact, the NANUK 910 Classic 2 Up Pistol hard case adapts to every environment and is favored by outdoor enthusiasts, sportsmen and sportswomen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable handguns. The Classic 2 Up Pistol case provides secure storage for many popular models along with space for two (2) single stack magazines or two (2) double stack magazines.

The NANUK 910 Classic 2 Up Pistol case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.

This MIL-Spec injection molded case is backed by a lifetime warranty.

FEATURES

  • Waterproof
  • Impact Resistant
  • Crushproof
  • Dustproof
  • Soft Grip foldable handle with handle stay
  • Automatic pressure release valve - All NANUK cases are equipped with an automatic pressure release valve. This valve automatically equalizes the pressure on the inside of the case. To ensure correct operation, this valve does not require any maintenance, does not need to be rotated or adjusted, and must not be blocked.
  • Padlockable
  • Stackable
  • PowerClaw™ latching system
  • Lightweight extra strength NK-7™ resin
  • 100% Stainless Steel hardware
  • Molded in bezel system
  • Integrated shoulder strap attachment feature
  • High performance hollow core waterproofing gasket
  • Integrated lid stay
  • Conditional Lifetime Guarantee* (see Warranty Tab)
  • Meets airline carry-on regulations
  • Made in Canada
  • Optional - Available Empty, pre-scored foam, or custom foam
Our goal is to provide each customer the perfect case solution. Contact us or give us a call at 619-660-2300 to discuss your case needs.

Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black, Orange, Yellow, Silver, Olive, Graphite, Lime, Tan

Interior Dimensions:  13.2 x 9.2 x 4.1" (33.6 x 23.4 x 10.4cm)
LID DEPTH: 1.3" (3.3 cm)  / BOTTOM DEPTH:  2.8" (7.1 cm)

Exterior Dimensions:   14.3 x 11.1 x 4.7" (36.3 x 28.2 x 12cm)

Weight:  3.0 lbs. (1.4kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Buoyancy: 
17 lbs. (7.7 kg)

Industry Standards & Certifications:   IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.

DOES NOT INCLUDE GUNS