NANUK 909 8-Knife Case Waterproof (11.4 x 7 x 3.7")

NANUK-909-8-Knife
$102.95
NANUK 909 8-Knife Case Waterproof (11.4 x 7 x 3.7")
Processing...

Product Details

Built to hold 8 single-blade folding knives, the NANUK 909 8-Knife Case is indestructible and built to protect and secure your collection. The protective foam interior is pre-cut to hold up to 8 knives as long as 5 5/8” (closed) and 3/4” wide including pocket clip. Keep your knives dust-free, dry and out of harm’s way with the compact NANUK 909. The slim profile makes it the perfect case for knife organization, protection and transport. Like all NANUK cases, the 909 is waterproof IP-67 rated, built with our MIL-Spec indestructible NK-7 Resin, and equipped with our PowerClaw superior 
latching system. Our life time warranty will make sure it protects your knives like no other compact case can. The NANUK 909 8-Knife Case has two reinforced metal eyelets which accommodate TSA-accepted case locks for additional security. Compatible with Spyderco, Kershaw, Benchmade, Cold Steel, Zero Tolerance, CRKT, Buck, Gerber, SOG and many other knife brands.

Built to organize, protect, carry and survive tough conditions, the NANUK 909 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

Lightweight, rugged and compact, the NANUK 909 hard case adapts to every environment.

The NANUK 909 protective case comes with a soft grip and ergonomic handle to make it easy to transport.

It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.

This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.

Our goal is to provide each customer the perfect case solution. Contact us or give us a call at 619-660-2300 to discuss your case needs.

FEATURES

  • Powerclaw Superor Latching System
  • Waterproof IP67 Rated
  • Impact Resistant NK-7 Resin
  • Padlockable
  • Stackable
  • Molded-in Bezel System
  • Soft Grip Handle
  • Automatic Pressure Release Valve
  • Integrated Lid Stay
  • 100% Stainless Steel Hardware
  • Lifetime Guarantee* See below
  • Made in Canada

FOAM FEATURES

  • High quality, high-density EVA foam
  • Oil and grease resistant
  • Superior impact and vibration absorption
Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black, Graphite, Olive, Orange, Silver, Tan, Yellow, Blue, Red

Interior Dimensions:  11.44 x 7.0 x 3.68" (29.1 x 17.8 x 9.3 cm)
LID DEPTH: 1.3" (3.3 cm)  / BOTTOM DEPTH:   2.37" (6.0 cm)

Exterior Dimensions:   12.64 x 9.0 x 4.38" (32.1 x 22.9 x 11.1 cm)

Weight:   2.16 lbs. (.98kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Buoyancy:   10 lbs. (4.5 kg)

Padlock Holes Diameter: 0.300"

Industry Standards & Certifications:   IPX7 (Waterproof), IP6X (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.