Built to survive the outdoors, water, dust and abuse of all kinds the
NANUK 985 is a favorite of sportsmen, sportswomen, hunters, law
enforcement and the military due to its relatively compact size and its
compatibility with firearms.
In fact, this is the perfect size long case for civilian car and
police cruiser trunks and fits a single rifle, AR-15, takedown shotgun
and many other guns.
The NANUK 985 features two spring-loaded handles and rolls smoothly
on its polyurethane wheels also making it the perfect protection
solution for photo and video pros who trust the NANUK 985 as a lighting
kit travel case or a tripod hard case.
Built to organize, protect, carry and survive tough
conditions, the 985 waterproof hard case is impenetrable and
indestructible with a lightweight, tough NK-7 resin shell.
Its four (4) PowerClaw latches, two of which feature an integrated
TSA accepted key lock, keep your equipment securely locked during
transit but accessible for inspection by the TSA when required.
With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
This indestructible MIL-Spec case is equipped with a lid stay feature
to keep the case safely open when in use and reinforced stainless-steel
eyelets can be used to secure additional padlocks.
The NANUK 985 protective case comes with a soft grip and ergonomic
handle to make it easy and comfortable to transport. The handle features
stainless steel hardware and is spring-loaded to keep it out of harm’s
way when traveling or during shipping. This transport case is also
equipped with an automatic pressure release valve and an integrated
This MIL-Spec injection molded case is backed by a lifetime warranty.
Inside, products can be secured with solid foam, custom foam or the
case can be purchased empty.
Our goal is to provide each customer the perfect case solution. Contact us
or give us a call at 619-660-2300 to discuss your case needs.
- TSA Powerclaw Latching System
- Waterproof IP67 Rated
- Indestructible NK-7 Resin
- Reinforced Metal Padlock Holes
- Tie down eyelets
- Polyurethane Wheels
- Spring Loaded Top Handle
- Soft Grip Handle Stay
- Automatic Pressure Release Valve
- Removable Lid
- Lid Stopper 110 degree
- 100% Stainless Steel hardware
- Conditional Lifetime Guarantee* (see Warranty below)
- Made in Canada
Materials: Lightweight NK-7™ resin - Polypropylene
Available Colors: Black or Olive
Interior Dimensions: 36.6 x 14.5 x 6.00" (93.0 x 36.8 x 15.2 cm)
LID DEPTH: 1.6" (4.1 cm) / BOTTOM DEPTH: 4.4" (11.1 cm)
Exterior Dimensions: 39.7 x 17.3 x 6.6" (101.0 x 44.0 x 16.8cm)
Weight: 15.8 lbs. (7.2 kg.) Empty
Depth Rating: 3 feet for 30 minutes (IP67)
Temperature Range: -20° F (-29 ° C) to 140° F (60 ° C)
Max Buoyancy: 100 lbs (45.4 kg)
Padlock Holes Diameter: .340"
Industry Standards & Certifications: IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1
Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration),
ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)
LIFETIME LIMITED WARRANTY AND DISCLAIMER
Inc. (“Plasticase”) warrants that the NANUK case accompanying this
document (the “Case”) will be free from defects in material and
workmanship for the life of the Case, subject to the terms and
conditions of this Limited Warranty and Disclaimer (the “Warranty”).
of Warranty The Warranty herein applies only to the original customer
and is conditional upon the customer giving prompt notice to
Plasticase of any discovered defects. Plasticase shall not be
responsible for any other defects or damage, including, but not limited
to, any defects or damage caused by or resulting from: (a) alterations
to the Case by anyone other than Plasticase; (b) accident; (c) damage
due to an intentional or negligent act of a third party; (d) abuse or
negligence; (e) wear and tear.; (f) mishandling; (g) failure to use
the Case in a safe and reasonable manner, or (h) force majeure. If the
Case, in the judgment of Plasticase, shows evidence of having been
altered, modified or repaired without the authorization of Plasticase,
the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS
EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED
OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Plasticase’s cumulative liability for damages of any kind whatsoever
arising out of the use or possession of the Case, regardless of the
form of action, whether in contract or tort, including negligence or
strict liability, shall be limited to the purchase price of the Case.
IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER
PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE
CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT
PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH
DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.