With more than 275 cubic inches of capacity, the NANUK 968
waterproof case with a retractable handle and easy-glide wheels can
store and haul a whole lot of gear.
Built to organize, protect, carry and survive tough conditions, the
968 waterproof hard case is impenetrable and indestructible with a
lightweight, tough NK-7 resin shell and it’s six (6) PowerClaw latches.
With NANUK’s exclusive locking and latching system, your case stays
clamped shut and secured until you are ready to open it.
The NANUK 968 hard case offers the maximum level of protection for all of your personal and professional equipment.
This protective case adds the convenience of wheels to make it easier
to travel with your photo gear, video gear, audio gear, bigger drones,
medical or industrial equipment, outdoor gear and much more!
Retractable handle and a set of wheels make this case one of the most convenient on the market.
The NANUK 968's polyurethane wheels handle rough terrain with ease
while the one-handed retractable handle offers unparalleled usability
The three (3) soft grip and ergonomic handles make the NANUK 968 easy to transport.
They feature stainless steel hardware and spring loaded handles to
keep them out of harm’s way when traveling or during shipping. This
transport case is also equipped with an automatic pressure release.
This MIL-Spec injection molded case is backed by a lifetime warranty.
Inside, products can be secured with cubed foam, custom foam, padded
dividers or the case can be purchased empty.
- Powerclaw Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- 2-Stage Retractable Handle
- Polyurethane Wheels
- Side Mounted Spring Loaded Handles
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel Hardware
- Conditional Lifetime Guarantee* (see Warranty below)
- Made in Canada
Materials: Lightweight NK-7™ resin - Polypropylene
Available Colors: Black
Interested in a Custom Color? Contact us
for a custom quote.
Interior Dimensions: 21.5 x 21.5 x 11.8" (54.6 x 54.6 x 30.0 cm)
LID DEPTH: 2.3" (5.8 cm) / BOTTOM DEPTH: 8.0" (20.3 cm)
Exterior Dimensions: 25.0 x 24.7 x 13.6" (61.0 x 62.7 x 34.5 cm)
Weight: 21.5 lbs. (9.76 kg.) Empty
Depth Rating: 3 feet for 30 minutes (IP67)
Temperature Range: -20° F (-29 ° C) to 140° F (60 ° C)
Buoyancy: 200 lbs. (91 kg)
Padlock Holes Diameter: 0.340"
Handle Height from Ground: 22.5" / 36.25"
Industry Standards & Certifications: IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1
Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration),
ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)
LIFETIME LIMITED WARRANTY AND DISCLAIMER
Inc. (“Plasticase”) warrants that the NANUK case accompanying this
document (the “Case”) will be free from defects in material and
workmanship for the life of the Case, subject to the terms and
conditions of this Limited Warranty and Disclaimer (the “Warranty”).
of Warranty The Warranty herein applies only to the original customer
and is conditional upon the customer giving prompt notice to
Plasticase of any discovered defects. Plasticase shall not be
responsible for any other defects or damage, including, but not limited
to, any defects or damage caused by or resulting from: (a) alterations
to the Case by anyone other than Plasticase; (b) accident; (c) damage
due to an intentional or negligent act of a third party; (d) abuse or
negligence; (e) wear and tear.; (f) mishandling; (g) failure to use
the Case in a safe and reasonable manner, or (h) force majeure. If the
Case, in the judgment of Plasticase, shows evidence of having been
altered, modified or repaired without the authorization of Plasticase,
the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS
EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED
OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Plasticase’s cumulative liability for damages of any kind whatsoever
arising out of the use or possession of the Case, regardless of the
form of action, whether in contract or tort, including negligence or
strict liability, shall be limited to the purchase price of the Case.
IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER
PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE
CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT
PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH
DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.