The NANUK 963 is built to organize, protect, carry and survive tough conditions.This waterproof hard case is impenetrable and indestructible with a
lightweight, tough NK-7 resin shell and it’s five (5) PowerClaw
With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
At 29 inches long and nearly 11 inches deep, the NANUK 963 can store a
whole lot of your essentials. The NANUK 963 hard case offers the
maximum level of protection for all of your personal and professional
equipment. It adds the convenience of wheels to make traveling much
easier with your photo gear, video gear, audio gear, medical or
industrial equipment, outdoor gear and much more!
Three soft-grip handles make this wheeled case one of the most
convenient and comfortable on the market. The 963's polyurethane wheels
handle rough terrain with ease while the one-handed retractable handle
offers unparalleled usability.
For total equipment protection and loads of capacity, look no
further than the NANUK 963 case retractable handle and wheels to get
your gear safely from point A to point B.
The NANUK 963 protective case comes with three (3) soft grip and
ergonomic handles with stainless steel hardware and spring-loaded
handles to keep them out of harm’s way when traveling or during
shipping. This transport case is also equipped with an automatic
pressure release valve.
This MIL-Spec injection molded case is backed by a lifetime warranty.
Inside, products can be secured with cubed foam, custom foam, padded
dividers or the case can be purchased empty.
Our goal is to provide each customer the perfect case solution. Contact us
or give us a call at 619-660-2300 to discuss your case needs.
- Powerclaw Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced metal padlock holes
- 2-Stage retractable handle
- Polyurethane Wheels
- Side mounted spring loaded handles
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel hardware
- Conditional Lifetime Guarantee* (see Warranty below)
- Made in Canada
Materials: Lightweight NK-7™ resin - Polypropylene
Available Colors: Black
Interior Dimensions: 29.00 x 18.00 x 10.6" (73.7 x 45.7 x 26.9 cm)
LID DEPTH: 2.1" (5.3 cm) / BOTTOM DEPTH: 8.5" (21.6 cm)
Exterior Dimensions: 32.5 x 21.00 x 12.3" (82.6 x 53.3 x 31.2 cm)
Weight: 22.50 lbs. (10.2 kg.) Empty
Depth Rating: 3 feet for 30 minutes (IP67)
Temperature Range: -20° F (-29 ° C) to 140° F (60 ° C)
205 lbs. (93 kg)
Industry Standards & Certifications: IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1
Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration),
ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)
LIFETIME LIMITED WARRANTY AND DISCLAIMER
Inc. (“Plasticase”) warrants that the NANUK case accompanying this
document (the “Case”) will be free from defects in material and
workmanship for the life of the Case, subject to the terms and
conditions of this Limited Warranty and Disclaimer (the “Warranty”).
of Warranty The Warranty herein applies only to the original customer
and is conditional upon the customer giving prompt notice to
Plasticase of any discovered defects. Plasticase shall not be
responsible for any other defects or damage, including, but not limited
to, any defects or damage caused by or resulting from: (a) alterations
to the Case by anyone other than Plasticase; (b) accident; (c) damage
due to an intentional or negligent act of a third party; (d) abuse or
negligence; (e) wear and tear.; (f) mishandling; (g) failure to use
the Case in a safe and reasonable manner, or (h) force majeure. If the
Case, in the judgment of Plasticase, shows evidence of having been
altered, modified or repaired without the authorization of Plasticase,
the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS
EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED
OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Plasticase’s cumulative liability for damages of any kind whatsoever
arising out of the use or possession of the Case, regardless of the
form of action, whether in contract or tort, including negligence or
strict liability, shall be limited to the purchase price of the Case.
IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER
PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE
CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT
PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH
DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.