The NANUK 933 stands up to water, shock, dust and just about
any threat to your sensitive gear from drones to medical equipment and
everything in between.
It’s built to organize, protect, carry and survive tough conditions,
with an impenetrable and indestructible with a lightweight, tough NK-7
resin shell and dual PowerClaw superior latches.
With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
Its deep base makes it a favorite of photographers and videographers,
drone operators/pilots, medical professionals, outdoor enthusiasts,
sportsmen, law enforcement officers, first responders, military, hunters
and shooting sports enthusiasts to protect their most valuable gear.
The NANUK 933 offers perfect storage and maximum protection for a
camera with a lens and accessories, drones, tools, medical equipment,
first aid supplies, rescue gear, satellite phones, music equipment, two
pistols with attachments and accessories, outdoor equipment, a CB radio,
fishing sonar, power and hand tools, electronics and accessories and so
The NANUK 933 protective case comes with a soft grip and ergonomic handle to make it easy to transport.
It also features stainless steel hardware and integrated handle stay
to keep the handle out of harm’s way when traveling or during shipping.
This transport case is also equipped with an automatic pressure
release valve and an integrated bezel system to accommodate custom
panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty.
Inside, products can be secured with cubed foam, custom foam, padded
dividers or the case can be purchased empty.
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Molded-in Belzel System
- Soft Grip Handle
- Automatic Pressure Release Valve
- Integrated Lid Stay
- 100% Stainless Steel hardware
- Conditional Lifetime Guarantee* (see Warranty below)
- Made in Canada
Materials: Lightweight NK-7™ resin - Polypropylene
Available Colors: Black, Orange, Yellow, Silver, Graphite
Interested in a Custom Color? Contact us
for a custom quote.
Interior Dimensions: 18.00 x 13.00 x 9.5" (45.7 x 33.00 x 24.1 cm)
LID DEPTH: 2.1" (5.3 cm) / BOTTOM DEPTH: 7.4" (18.8 cm)
Exterior Dimensions: 19.9 x 16.1 x 10.1" (50.5 x 40.9 x 25.7 cm)
Weight: 8.0 lbs. (3.6 kg.) Empty
Depth Rating: 3 feet for 30 minutes (IP67)
Temperature Range: -20° F (-29 ° C) to 140° F (60 ° C)
Buoyancy: 65 lbs. (29.5 kg)
Padlock Holes Diameter: 0.340"
Industry Standards & Certifications: IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1
Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration),
ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)
LIFETIME LIMITED WARRANTY AND DISCLAIMER
Inc. (“Plasticase”) warrants that the NANUK case accompanying this
document (the “Case”) will be free from defects in material and
workmanship for the life of the Case, subject to the terms and
conditions of this Limited Warranty and Disclaimer (the “Warranty”).
of Warranty The Warranty herein applies only to the original customer
and is conditional upon the customer giving prompt notice to
Plasticase of any discovered defects. Plasticase shall not be
responsible for any other defects or damage, including, but not limited
to, any defects or damage caused by or resulting from: (a) alterations
to the Case by anyone other than Plasticase; (b) accident; (c) damage
due to an intentional or negligent act of a third party; (d) abuse or
negligence; (e) wear and tear.; (f) mishandling; (g) failure to use
the Case in a safe and reasonable manner, or (h) force majeure. If the
Case, in the judgment of Plasticase, shows evidence of having been
altered, modified or repaired without the authorization of Plasticase,
the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS
EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED
OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Plasticase’s cumulative liability for damages of any kind whatsoever
arising out of the use or possession of the Case, regardless of the
form of action, whether in contract or tort, including negligence or
strict liability, shall be limited to the purchase price of the Case.
IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER
PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE
CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT
PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH
DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.