NANUK 923 Waterproof Utility Case (16.7 x 11.3 x 5.4")

NANUK-923
$174.95
NANUK 923 Waterproof Utility Case (16.7 x 11.3 x 5.4")
Processing...

Product Details


Rugged, waterproof and dustproof, the 923 hard case adapts to every environment.

The NANUK 923 is favored by business people, industrial, construction and worksite teams, drone operators, photographers, sportsmen, law officers, military, medical professionals, hunters and shooting sports enthusiasts to protect their most valuable gear.

This case offers a perfect storage room for a laptop, camera with a lens and accessories, drones, tools, medical equipment, music equipment, two pistols with attachments and accessories, outdoor equipment, knives, fishing sonar, smaller tools, electronics and accessories.

Rubber feet provide secure grip on all surfaces without scratching, while the two standard TSA locking latches protect your gear during your travels. The spring-loaded handle retracts when not in use and the reinforced padlock eyelets add another layer of protection for expensive equipment. Protection never looked so good.

The NANUK 923 protective case comes with a soft grip and ergonomic handle to make it easy to transport.

This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. For extra security, the two latches feature an integrated TSA accepted key lock to keep your equipment securely locked during transit but accessible for inspection by the TSA when required.

This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.

FEATURES

  • Powerclaw Superior Latching System
  • Waterproof IP67 Rated
  • Impact Resistant NK-7 Resin
  • Padlockable
  • Stackable
  • Molded-in Bezel System
  • Soft Grip Handle
  • Automatic Pressure Release Valve
  • Integrated Stay Lid
  • 100% Stainless Steel hardware
  • Lifetime Guarantee* (see Warranty below)
  • Made in Canada

Materials:   Lightweight NK-7™ resin - Polypropylene

Available Colors:   Black, Orange, Yellow, Silver, Graphite
Interested in a Custom Color? Contact us for a custom quote.

Interior Dimensions:  16.6 x 11.3 x 5.4" (42.2 x 28.7 x 13.7 cm)
LID DEPTH: 1.8" (4.6 cm)  / BOTTOM DEPTH:  3.6" (9.1 cm)

Exterior Dimensions:   18.6 x 14.4 x 6.3" (47.2 x 36.6 x 16.0 cm)

Weight:  5.9 lbs. (2.7 kg.) Empty

Depth Rating:  3 feet for 30 minutes (IP67)

Temperature Range:   -20° F (-29 ° C) to 140° F (60 ° C)

Buoyancy:   40 lbs. (18.1 kg)

Padlock Holes Diameter: 0.340"

Industry Standards & Certifications:   IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1 Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration), ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)

NANUK's Warranty:

LIFETIME LIMITED WARRANTY AND DISCLAIMER

Plasticase, Inc. (“Plasticase”) warrants that the NANUK case accompanying this document (the “Case”) will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the “Warranty”).

Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Liability Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.