Great for medium size gear, the NANUK 918 waterproof hard
case is impenetrable and indestructible with a lightweight, tough NK-7
resin shell and its PowerClaw superior latching system.
With NANUK’s exclusive locking and latching system, your case stays
shut and secured until you are ready to open it. The NANUK 918
organizes, protects, carries and survives in any condition, especially
A compact case with a deep base. The NANUK 918 has become the go-to protective model for
photographers, videographers, drone operators/pilots, outdoor
enthusiasts, sportsmen, law enforcement officers, first responders,
military, hunters, shooting sports enthusiasts, medical professionals,
and many more to protect their most valuable gear.
The generous capacity of the NANUK 918 case makes it perfect for
protecting cameras, electronics, boating gear, handguns, small drones,
sample kits, first aid supplies, medical equipment, compact tools, and
equipment of all sorts. Lightweight, rugged and compact, the NANUK 918
hard case adapts to every environment.
The NANUK 918 protective case comes with a soft grip and ergonomic handle to make it easy to transport.
It also features stainless steel hardware and integrated handle stay
to keep the handle out of harm’s way when traveling or during shipping.
This transport case is also equipped with an automatic pressure release
valve and an integrated bezel system to accommodate custom panels
without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty.
Inside, products can be secured with cubed foam, custom foam, padded
dividers or the case can be purchased empty.
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Molded-in Bexel System
- Soft Grip Handle
pressure release valve
- Integrated Lid Stay
- 100% Stainless Steel hardware
- Lifetime Guarantee* (See Warranty below)
- Made in Canada
Materials: Lightweight NK-7™ resin - Polypropylene
Available Colors: Black, Orange, Yellow, Silver, Olive, Graphite
Interested in a Custom Color? Contact us
for a custom quote.
Interior Dimensions: 14.9 x 9.8 x 8.6" (37.8 x 24.9 x 21.8 cm)
LID DEPTH: 2.1" (5.3 cm) / BOTTOM DEPTH: 6.5" (16.5 cm)
Exterior Dimensions: 16.9 x 12.9 x 9.3" (42.9 x 32.8 x 23.6 cm)
Weight: 6.4 lbs. (2.9 kg.) Empty
Depth Rating: 3 feet for 30 minutes (IP67)
Temperature Range: -20° F (-29 ° C) to 140° F (60 ° C)
Buoyancy: 40 lbs. (18.1 kg)
Padlock Holes Diameter: 0.340"
Industry Standards & Certifications: IPX7 (Waterproof), IPX6 (Dustproof), ATA Specification 300 - Catagory 1
Impact, ASTM D-4169 DC-18 (Drop Test), ASTM D-4169 DC-18 (Vibration),
ASTM D-4169 DC-18 (Rainfall), MIL-STD-810F (Immersion)
LIFETIME LIMITED WARRANTY AND DISCLAIMER
Inc. (“Plasticase”) warrants that the NANUK case accompanying this
document (the “Case”) will be free from defects in material and
workmanship for the life of the Case, subject to the terms and
conditions of this Limited Warranty and Disclaimer (the “Warranty”).
of Warranty The Warranty herein applies only to the original customer
and is conditional upon the customer giving prompt notice to
Plasticase of any discovered defects. Plasticase shall not be
responsible for any other defects or damage, including, but not limited
to, any defects or damage caused by or resulting from: (a) alterations
to the Case by anyone other than Plasticase; (b) accident; (c) damage
due to an intentional or negligent act of a third party; (d) abuse or
negligence; (e) wear and tear.; (f) mishandling; (g) failure to use
the Case in a safe and reasonable manner, or (h) force majeure. If the
Case, in the judgment of Plasticase, shows evidence of having been
altered, modified or repaired without the authorization of Plasticase,
the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS
EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED
OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Plasticase’s cumulative liability for damages of any kind whatsoever
arising out of the use or possession of the Case, regardless of the
form of action, whether in contract or tort, including negligence or
strict liability, shall be limited to the purchase price of the Case.
IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER
PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE
CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT
PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH
DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY
FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.