|
Designed to provide superior protection under the harshest conditions,
Our EXTREME SX Series cases offer tripple the impact strength and self extinguishing flame retardant properties. Available in a variety of sizes, the EXTREME SX Series cases are tough enough to survive any adventure.
Harness the strength and toughness of a hurricane for your valuable equipment!
Our HURRICANE SE series cases are designed to provide top of the
line protection at affordable prices. They survive! Seahorse cases
satisfy Mil-Spec and IP Standards 67.
UNCONDITIONAL LIFETIME GUARANTEE OF PERFORMANCE
FEATURES
-
Automatic pressure purge system
-
Molded-in padlock holes (fits standard size
Masterlocks®).
-
Available with or without multilayer protective
cubed matrix Accuform Foam.
-
Latches are available with keyed chrome metal
locks or plastic non-corrosive locks.
-
Available with easy-to-install Panel Kits supplied
with o-rings and screws.
Inside Dimensions
18.64" x 13.46" x 6.74"
(47.34cm x 34.18cm x 17.12cm)
Outside Dimensions
20.1" x 15.8" x 7.6"
(51.1cm x 40.1cm x 19.3cm)
Available Colors: SX cases are available only in Black as a stock color
Includes: Shock Absorbing Molded
Foam Laptop Insert, Lid Office Organizer, Metal Latch Locks and
Padded Shoulder Strap
Will
my Laptop fit in the Seahorse SE/SX-710CC or SE/SX-720CC Laptop tray? ?
The Impact Absorbing Neoprene Material
tray was designed to hold even the largest laptops.
The cavities in the neoprene insert are as follows:
(As you are looking into the case)
Long cavity at left: 2 7/8" L to R X 11 5/8" F to B X 2 3/4" D (for cables
and longer items).
Laptop Tray: 14 1/8" L to R X 11 13/16" F to B X 1 1/4" D (removable
Velcro strap can secure up to 3" thick laptop)
Below laptop a) Lower Left 6 3/8" L to R X 10 7/16" F to B X 1 1/4" D
b) Lower Back Right 6 3/16" L to R X 3 5/8" F to B X 1 1/4" D
c) Lower Front Right 6 3/16" L to R X 6 1/2" F to B X 1 1/4" D
The horizontal
dimensions of the SE-720CC are exactly the
same. Add 2 inches to the depth of the far left cavity and the lower cavities on the right. The Laptop shelf remains the same.
Your laptop computer is bigger than 14 1/8" X 11 13/16"? Not
all is lost. By performing a small modification, you can easily fit a
laptop measuring up to 17 1/4" wide. The thin rib separating the
Laptop Cavity and the Long Cavity at Left can be removed with a sharp
blade. This modification must be performed by you, the end user.
Click here to see more Seahorse Cases.
Seahorse General Specifications
Do you really need an SX case? What is the difference between the SX and SE?
| 
