"Harness the strength and toughness of a hurricane for your valuable equipment!
Our HURRICANE SE series cases are designed to provide top of the
line protection at affordable prices. They survive! Seahorse cases
satisfy Mil-Spec and IP Standards 67.
UNCONDITIONAL LIFETIME GUARANTEE OF PERFORMANCE
PROUDLY MADE IN THE USA
FEATURES
-
Automatic pressure purge system
-
Molded-in padlock holes (fits standard size
Masterlocks®).
-
Available with or without multilayer protective
cubed matrix Accuform Foam.
-
Latches are available with keyed chrome metal
locks or plastic non-corrosive locks.
-
Available with easy-to-install Panel Kits supplied
with o-rings and screws.
Inside Dimensions
18.297" x 13.197" x 6.72"
(46.48cm x 33.52cm x 17cm)
Outside Dimensions
19.75" x 15.53" x 7.48"
(50.16cm x 39.44cm x 18.99cm)
Available Colors: Black, Gunmetal Gray, Safety
Yellow (OSHA) and Intl. Orange (SOLAS).
Includes: Shock Absorbing Molded
Foam Laptop Insert, Lid Office Organizer, Metal Latch Locks and
Padded Shoulder Strap
Will
my Laptop fit in the Seahorse SE/SX-710CC or SE/SX-720CC Laptop tray? ?
The Impact Absorbing Neoprene Material
tray was designed to hold even the largest laptops.
The cavities in the neoprene insert are as follows:
(As you are looking into the case)
![]()
Long cavity at left: 2 7/8"" L to R X 11 5/8"" F to B X 2 3/4"" D (for cables
and longer items).
Laptop Tray: 14 1/8"" L to R X 11 13/16"" F to B X 1 1/4"" D (removable
Velcro strap can secure up to 3"" thick laptop)
Below laptop a) Lower Left 6 3/8"" L to R X 10 7/16"" F to B X 1 1/4"" D
b) Lower Back Right 6 3/16"" L to R X 3 5/8"" F to B X 1 1/4"" D
c) Lower Front Right 6 3/16"" L to R X 6 1/2"" F to B X 1 1/4"" D
The horizontal
dimensions of the SE-720CC are exactly the
same. Add 2 inches to the depth of the far left cavity and the lower cavities on the right. The Laptop shelf remains the same.
Your laptop computer is bigger than 14 1/8" X 11 13/16"? Not
all is lost. By performing a small modification, you can easily fit a
laptop measuring up to 17 1/4" wide. The thin rib separating the
Laptop Cavity and the Long Cavity at Left can be removed with a sharp
blade. This modification must be performed by you, the end user.
"
| 
