Shop Online or Call Toll Free 1-866-426-7766
Local (San Diego) & International 1-619-660-2300
or contact us by email here.

Watertight Wire Seals




LEARN MORE
Watertight Wire Seal - 13

OUR LOW PRICE 15.00

Fits Cable diameter: 0.236" to 0.472" (6 to 12mm)




LEARN MORE
Watertight Wire Seal - 16

OUR LOW PRICE 15.00

Fits cable diameter: 0.394" to 0.551" (10 to 14mm) (RJ45)




LEARN MORE
Watertight Wire Seals - 11

OUR LOW PRICE 15.00

Fits Cable diameter: 0.118" to 0.279" (3 to 7mm)




LEARN MORE
Watertight Wire Seals - Self Installed

OUR LOW PRICE 15.00




LEARN MORE
Watertight Wire Seal - 20

OUR LOW PRICE 20.00

Fits cable diameter: 0.05" to 0.47" (#10-2 AWG) (1/2" NPT)




LEARN MORE
Watertight Wire Seal - 51

OUR LOW PRICE 20.00

Fits cable diameter: 0.51" to 0.71: (#1-3/0 AWG) (3/4" NPT)




LEARN MORE
Watertight Wire Seal - Flat

OUR LOW PRICE 20.00

Fits Flat Cable Gauge: 14/13 - 12/3 AWG




LEARN MORE
Watertight Wire Seals - Installed

OUR LOW PRICE 30.00

Watertight Wire Seals

We are the only Watertight Case supplier that offers Watertight Wire Seals installed on protective cases. Watertight Wire Seals are often used to run a lipstick camera cable from a video camera in a case through the wall mounted on the head to take video while surfing,kayaking, snorkeling, snowboarding, etc. The case is then mounted to a Gexar Lumbar Pack (shown above)to secur the case to the body and allow for freedom of movement.

Watertight Wire Seals can be purchased here for self-installation.

For running wire through a case wall using a waterproof, strain relief seal.  Clamping mechanism works as a compression nut or packing gland.  As the outer nut is tightened, inside seal against cable(or tubing). Made of nylon 6/6 flame resistant, self-extinguishing Buna-N form seal. Ready for typical applications such as propane hose applications, vinyl tubing, instrumentation, and underground for direct burial.
 
  • Resistant to salt water, acids, alkalis, alcohol, ether, esters, ketones, mineral, animal and vegetable oils
  • UL recognized, RoHs compliant, exceeds Nema 4x or 6 requirements
  • Watertight to 300 Feet!
  • Sealing solutions for a wide range of wire sizes
  • Non-corrosive for use in the marine environment
  • Accommodates duplex and triplex wires in flat insulators
  • Can be used for propane enclosures, antennas, & hydraulic hoses
  • Nylon with synthetic rubber and/or Urethane gasket
 



LEARN MORE
Watertight Wire Seal - Ethernet FT Shielded

OUR LOW PRICE 40.00

Fits Ethernet CAT: 5/6 dual connect with cap





Shop Online or Call Toll Free 1-866-426-7766
Local (San Diego) & International 1-619-660-2300
or contact us by email here.

About Us  |   Products  |   Custom Cases  |   U.S. Government Sales  |   F.A.Q.  |   Links of Interest  |   Contact Us